Brian & Brandi's Van's RV10 Build

Glare Shield Cover


by Brandi Wednesday, April 18, 2012

We received our Ultraleather order last week so I've been working on the glare shield cover for the past few days. I had made a pattern out of freezer paper before we installed the windscreen. Glad that I did because it's pretty hard to work in that area with the windscreen attached. From the pattern, I cut out 1/8" Volara Sculpting Foam to match the pattern and then placed it on the glare shield to make sure I had the perfect fit. I did the same with the underside of the glare shield up to the panel. I then used the foam to cut out a piece of Ultraleather for the top and underside and stitched them together using a french seam. (I also spent some time drooling over that Juki machine in the french seam video!) After stitching, I glued the foam to the Ultraleather using 3M contact adhesive.

Comments (1) -

brian
brian
4/18/2012 4:55:37 PM #

Is that a couch cushion in the airplane?? Smile